200A 250A NACS Plug Tesla Wallbox Connector for Tesla Supercharger Station

Short Description:

200A 250A Tesla NACS Charging Solutions for Electric Vehicles:  Tesla’s NACS charge port and the company’s extensive network of Superchargers are largely considered the gold standard, and it appears other automakers are ready to make Tesla’s system the industry standard. In May 2023, Ford was the first to agree to team up with Tesla and adopt the 200A 250A NACS plug; then the dominos started falling, with several other automakers recently announcing agreements with 200A 250A Tesla NACS connector.

 


Product Detail

Product Tags

PRODUCT INTRODUCTION

NACS Plug

200A 250A NACS Charging Cable is Tesla’s previously proprietary direct current (DC) fast charging connector standard—formerly known simply as the “Tesla charging connector.”

It has been used with Tesla cars since 2012 and the connector design became available to other manufacturers in 2022.

It was designed for Tesla’s 400-volt battery architecture and is much smaller than other DC fast charging connectors.

The 200A 250A NACS connector is used with Tesla superchargers, which currently charge at a rate of up to 250kW.

PRODUCT FEATURES

1.The 200A 250A NACS connector has a single button located on the top center of the handle. When the button is depressed, a UHF signal is emitted. When the connector is locked in place, the signal commands the vehicle to retract the latch holding the connector in place. When the connector is not locked in place, the signal commands the nearby vehicle to open the door covering the inlet.

2,If charge point operators want to offer charging for new Ford and GM EVs, they’ll need to convert some of their CCS1 charger connectors to 200 250A NACS Plug. DC fast chargers like Tritium’s PKM150 will be able to accommodate 200A 250A NACS connectors in the near future.

3,Tesla Gun 200A 250A Tesla NACS Connector,200A 250A Tesla NACS Plug.

WechatIMG2392

SPECIFICATION

Features 1. Meet NACS standard
2. Concise appearance, support back installation
3. Protection Degree: IP67
4.Max charging power: 200kW,250kW
Mechanical Properties 1. Mechanical life: no-load plug in/pull out>10000 times
2. Impat of external force: can afford 1m drop amd 2t vehicle run over pressure
Electrical Performance 1. DC input: 200A 250A 1000V DC MAX
3. Insulation resistance: >2000MΩ(DC1000V)
4. Terminal temperature rise: <50K
5. Insertion / Withdrawal Force: < 90N
6. UV Resistance: F1 per UL 746C
Applied Materials 1. Case Material: Thermoplastic,flame retardant grade UL94 V-0
2. Pin: Copper alloy,silver +thermoplastic on the top
Environmental Performance 1. Operating temperature: -40°C~+50°C

PRODUCT PICTURES

tesla-nacs

EV CHARGING CABLE TESLA NACS GUN FEATURES

Physical design

The 200A 250A TESLA NACS Gun is an EV connector complies with the standard of NACS. The 200A 250A NACS connector is used with Tesla superchargers, which currently charge at a rate of up to 250kW.

Voltage Rating

The 80A ,125A ,200A,250A ,350A TESLA connector can be used to charge electric vehicles quickly, thanks to its 1,000-volt DC maximum voltage rating. It is the ideal choice for anyone who wants to charge their electric vehicle quickly and efficiently. The 200A 250A TESLA connector, with its high voltage rating, 200A 250A TESLA Plug is ideal for charging electric vehicles.

Safe Features

The 200A 250A TESLA connector has a number of safety features that protect against potential hazards such as overvoltage and overcurrent. These features include short circuit protection, ground fault detection, and temperature monitoring.

High Power Ratings

MIDA TESLA plug Designed to handle high currents, offers exceptional power ratings of 80A, 125A, 200A, and 250A ,350A TESLA Connector. This outstanding capacity ensures ultra-fast DC charging speeds significantly reducing the time spent at charging stations.

Ultrasonic Welding Technology

This technology can make the resistance of the EV tend to zero during the charging process, and reduce the phenomenon of heating up during the DC charging process of the EV.

Quality Assurance

MIDA TESLA EV Plugs can withstand more than 10,000 times of plugging and unplugging. Ensure the safety of long-term power supply, solid and durable, and wear-resistant. It reduces the operation and maintenance costs of electric vehicle charging enterprises.

 

OEM&ODM

200A 250A TESLA Gun supports simple LOGO customization and also supports customization of the entire function and appearance. There are professional sales and technical personnel docking. Open the road of brand agency for you.

Versatility and Compatibility

The 200A 250A TESLA plug compatible with all TESLA EV models on the market today.whether you own a compact electric car, a powerful electric SUV a heavy truck, a bus or a commercial electric vehicle, our 200A 250A NACS Gun TESLA plug is designed to meet your DC fast charging needs.

Enhanced Safety Features

Ultrasonic welding technology is used between the conductive terminal and the cable, the contact resistance tends to be zero, the temperature rise is lower during use and the service life of the product can be extended at the same time. And built-in temperature sensors, the charging process is safer


  • Previous:
  • Next:

  • Write your message here and send it to us
    • Follow us:
    • facebook (3)
    • linkedin (1)
    • twitter (1)
    • youtube
    • instagram (3)
    Write your message here and send it to us